Yadda zaka canza BOM a SAP

Yadda zaka canza BOM a SAP

Canza BOM a SAP yana iya samun nasara a cikin SAP ma'amala CS02 Canja kayan BOM. Za'a iya ƙarawa ko cire kayan aiki ta amfani da wannan lambar.

Nuna BOM a SAP

Za'a iya nuna wani abu na jari na SAP a cikin SAP za a iya nuna ta ta amfani da kalmar sirri na CS03 na BOM.

Bayan abubuwan BOM sun rasa

Bayan BOM ko kwafi zuwa wani sabon shuka, wadannan abubuwa bazai buga dashi ba.

Alal misali, don Mataki M:

Matsalar M / Shuka A / BOM X:

Rubutun farko: abu 010, abu 1 na aiki zuwa 01.09.2015,

Bayan abubuwa: abu 010, abu na 2 mai aiki daga 01.09.2015 tare da lambar canji, ba a kwafe shi ba don Magana M a Tsarin B (Fig 1).

An buga shi zuwa (2 lokuta):

Farko na farko, Matsalar M / Shuka B / BOM Y:

Rubutun farko: abu 010, abu na 1 yana aiki zuwa 31.12.9999,

Bayan abubuwa 2 bace (Fig 2.1).

Na biyu shari'ar: abu M / Shuka B / BOM Y:

Na farko abu 1 bace,

Bayan abubuwa: abu 010, abu na 2 yana aiki zuwa 31.12.9999 (Fig 2.2).

A wannan yanayin, BOM X a Tsarin A dole ne a canza lambar da aka hade da abin da ke gaba.

Akwai lokuta 2 dabam dabam, a cikin CS03 Nuni BOM: Gidaran Bayani na Bayani wanda daya yayi ta gwada BOM a Tsarin A da Shuka B don Magana M.

1 Rubutun farko da aka kofe

Na farko, abin da aka kofe a cikin shuka B shine kayan farko, a zahiri amfani to sai ku yi tsalle zuwa mataki na 3, kamar yadda za'a iya ƙara abubuwa masu zuwa.

2 Bayan an kwashe abu

Idan ana kwashe abin da ke biyowa, dole ne kuyi wani mataki na gaba, wanda shine a canza shi zuwa na farko abu, sa'an nan kuma ƙara abubuwa masu zuwa.

Da farko, shigar da Mataki na M da Tsarin B a cikin CS02 Sauya BOM na BOM: Babba na farko (Fig. 3) (babu buƙatar canza Canjin Daga kwanan wata), sanya kayan farko a maimakon abin da ke cikin CS02 Canji BOM : Janar Item Overview (Fig. 4), da ajiye.

3 Ƙara abu mai biyowa

Bayan da ka tabbatar da cewa abu na farko bai kasance ba, za ka iya ƙara abin da ke gaba. Shigar da kayan aikin M, Plant B, da kuma canza lambar (Fig 5) a cikin CS02.

Bayan shigar da bayanin don sauyawa (Fig. 6), lambar canzawa zata atomatik da tabbacin daga kwanan wata tare da lambar sabuntawa (Fig. 7), wanda shine wanda kake son amfani.

Hakanan zaka iya sanya abun bayan abu a maimakon kayan farko (Fig 8), da ajiyewa.

4 Bincika saiti

Binciken biyu a CS03 cewa sanyi na karshe ya dace da abin da kake so Shuka B / BOM Y tare da kayan aiki da kayan da ke biyowa daga lokacin da aka canza (Fig 9).

Hotuna

Fig.1: SAP CS03 Nuna BOM kayan aiki: Gidan Gida na Bayani BOM wanda ke dauke da abu tare da bangaren da ke gaba,

Fig2.1: SAP CS03 Nuna BOM na BOM: Babban Takaddun Bayani BOM ta kwafe shi tare da abu mai biyo baya wanda ya ɓace,

Fig2.2: SAP CS03 Nuna BOM na BOM: Babban Takaddun Bayani BOM ta kwafe shi tare da ɓangaren abu na ɓataccen ɓata,

Fig3: SAP CS02 Canja kayan BOM: Hoto na farko Shigar abu da shuka don sabunta abubuwa,

Fig4: SAP CS02 Sauya kayan BOM: Janar Item Overview Sabunta abu abu,

Fig. 5: SAP CS02 Canja kayan BOM: Hoto na farko Shigar abu, shuka da canza lambar,

Fig.6: SAP CS02 Canja kayan BOM: Bayanan Gudanarwa na Yanki Shigar da bayanin canji,

Fig. 7: SAP CS02 Canja kayan BOM: Akwatin farko Kwanan wata an kayyade ta atomatik daga lambar canji,

Fig.8: SAP CS02 Canja kayan BOM: Janar Item Overview Daidaita abu tare da bin bangaren da canza lambar,

Fig. 9: SAP CS03 Nuna BOM: Binciken Abubuwan Hulɗa Tarbiyyar BOM Target.

Tambayoyi Akai-Akai

Yadda za a canza Bam a SAP daidai?

Canza bambam a cikin SAP yana da sauƙin cuci a cikin SAP ma'amala CS02 Canji Bam. Ana iya ƙara kayan haɗin ko a cire shi ta amfani da wannan tokode.

Mene ne tsari don canza lissafin kayan (Bam) a cikin SAP?

Canza Bam a cikin SAP ana yin ta amfani da ma'amala CS02, inda za'a iya an ƙara su ko cire kayan haɗin.

S/4HANA SAP kayan sarrafawa Gabatarwa horarwar bidiyo